Discovery Sport Forum banner

Anyone knows how to erase memory settings of seats and mirrors?

3533 Views 3 Replies 2 Participants Last post by  rcbjr2
I previously had a post about that the driver side mirror does not dip down in R. However I just found out that both mirrors dipped down in my wife's Memory 1 setting. Wanna see if resetting it will work
1 - 4 of 4 Posts
I previously had a post about that the driver side mirror does not dip down in R. However I just found out that both mirrors dipped down in my wife's Memory 1 setting. Wanna see if resetting it will work
I believe its both mirrors dip or neither mirror dips. You can't set them independently. However, having said that, I have seen posts about adjusting each mirror while you're backing up and then switching to neutral to save the settings. However, other posts indicated that this option was removed from the manual. The online manual seems to indicate that they can be adjusted: Land Rover Owner Information. From my perspective, mine looks like the passenger side dips lower. I am having trouble with the driver's side not returning to the memorized position after backing up. I often have to press my memory button to get it to return to the proper location. I'm sure it's yet again one of those software issues.
I believe its both mirrors dip or neither mirror dips. You can't set them independently. However, having said that, I have seen posts about adjusting each mirror while you're backing up and then switching to neutral to save the settings. However, other posts indicated that this option was removed from the manual. The online manual seems to indicate that they can be adjusted: Land Rover Owner Information. From my perspective, mine looks like the passenger side dips lower. I am having trouble with the driver's side not returning to the memorized position after backing up. I often have to press my memory button to get it to return to the proper location. I'm sure it's yet again one of those software issues.
I've tried to save the adjusted position at N when I'm backing up, but no luck
I've tried to save the adjusted position at N when I'm backing up, but no luck
Yea, someone on another forum said it doesn't work and the N reference has been removed from the UK manual (or something like that).
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top